|
|
|
3" Diameter - Hole Mount / / / / |
|
|
Part Number: 990.007 |
Actual Diameter: 2 - 7/8" |
Thread size: M6 bolt |
Backing Material: HOOK |
|
|
This 3" (75mm) diameter backing plate was made specifically for use with the Rupes LHR75 (pneumatic) and LHR75e (electric) BigFoot Random Orbital Polishers. It's a good idea to keep at least one spare on hand, as they are not all that easy to locate in a pinch. |
|
|
Price: $28.30 |
|
|
|
Rupes 3" Velcro Backing Plate
|
|
Click to enlarge image(s)
|
Occasionally, BigFoot® needs a new shoe.
The Rupes LHR75 BigFoot 3" Air-Powered Mini Random Orbital Polisher is one wicked machine. Its massive 15mm ø orbit and 11,000 RPM top-speed can stress the backing plate's Velcro® hooks, causing them to break.
Technique, overall use, and the type of work being accomplished can also impact the life of the plate. Should you accidentally drop the machine (and the plate is impacted in the fall), its thin metal mounting pad can bend, causing the plate to wobble something fierce.
Eventually, in one way or another... the backing plate will need to be replaced.
The Rupes 990.007 is a direct repacement for the factory installed unit. It's a good idea to keep at least one spare on hand if you own an LHR75, as they are not all that easy to locate in a pinch.
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 75mm / 2-7/8"
- Attachment material: micro hook
|
- Thread size: 6mm bolt
- Weight: 30g (1.06 oz.)
|
|
Part Number: 624064000 |
Actual Diameter: 80mm / 3-1/8" |
Thread size: M6 bolt |
Backing Material: HOOK |
|
|
The Metabo® 624064000 80mm (3-1/8") Velcro Backing Plate comes factory installed on the Metabo SXE400 Electric Random Orbital Sander. This plate is a great match for Meguiar's 3" DA Microfiber Discs (3-3/8" actual), as well as Rupes® 80/100mm (78-80mm actual) Foam Buffing Pads. This is a very rigid plate, with excellent holding power.
|
|
|
Price: $17.95 |
|
|
|
Metabo 3-1/8" Velcro Backing Plate
|
|
Click to enlarge image(s)
|
Metabo 3-1/8" Velcro Backing Plate.
This is a direct replacement for the Metabo SXE400 Backing Plate. It's also a fantastic fit for Meguiar's 3" DA Microfiber Cutting and Finishing Discs, which actually measure 3-3/8" diameter.
Fits other machines utilizing a 6mm bolt. Excellent holding power.
This backing plate is a bit too large to work with 3" sanding discs.
However, it fits a wide variety of buffing pads, including:
Rupes 3" Foam Buffing Pads
Part numbers 9.BF100U, 9.BF100H, 9.BF100J, 9.BF100M, 9.BF100S
Meguiar's 4" Soft Buff Foam Pads
Part numbers W7204, W8204, W9204
Meguiar's DA Powerpak Pads
Part numbers G3507, G3508, and G3509
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 80mm / 3-1/8"
- Attachment material: micro hook
|
- Thread size: 6mm bolt
- Weight: 40g (1.41 oz.)
|
|
|
3" Diameter - Male Thread / / / / |
|
|
Part Number: DBP3 |
Actual Diameter: 2 - 15/16" |
Thread size: 5/16-24 |
Backing Material: MICRO HOOK |
|
|
The specialized injection-molded foam has been designed to deliver just the right amount of firmness; yet, it is comfortable when used on complex shapes, such as curved panels, hood bulges, bumper covers, and fender flares. Micro-hook Velcro really holds on to all varieties of buffing pads, and has proven to be remarkable long lasting.
|
|
|
Price: $18.49 |
|
|
|
Meguiar's Soft Buff 3" D/A Backing Plate
|
|
Click to enlarge image(s)
|
The best Meguiar's 3" plate, to date!
Build quality abounds.
One-piece design features an internal rigid composite plate, assuring that the backing plate will not be easily damaged due to an unfortunate drop. The beefed-up design also ensures long term durability, and balancing. (5/16-24 male thread)
The specialized injection-molded foam has been designed to deliver just the right amount of firmness; yet, it is comfortable when used on complex shapes, such as curved panels, hood bulges, bumper covers, and fender flares. Micro-hook Velcro really holds on to all varieties of buffing pads, and has proven to be remarkable long lasting.
Looking for a comparable backing plate in a different diameter? 5" DBP5 | 6" DBP6
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 2-15/16"
- Attachment material:
Velcro®- low profile hook
|
- Thread size: 5/16"-24 male
- Long lasting:
One piece molded construction
|
|
Part Number: 102GG |
Actual Diameter: 2 - 7/8" |
Thread size: 5/16-24 |
Backing Material: MICRO HOOK |
|
|
This is a tall and heavy plate. The added weight is a bonus when used on machines designed for use with larger backing plates, as it keeps the balance intact. A bit stiff, but no more than the average plate. One of my favorites, and is super durable. Weight: 80g. Height to mounting pad: 1".
|
|
|
Price: $23.46 |
|
|
|
Mirka 3" Diameter Velcro Backing Plate
|
|
Click to enlarge image(s)
|
A chunky bruiser of a plate. Micro-hook Velcro.
The Mirka 102GG 3" Velcro Backing Plate is built like a tank. Its height comes in handy at times, while the added weight allows it to work well with machines designed for 5" and 6" backing plates. Molded polymer construction means that the black hub, yellow foam center, and Velcro face are molded together, not glued. Consequently, durability is tip-top.
The face of the plate is stiff, yet when used on curved surfaces its edge conforms to some degree. Its micro-hook Velcro is short, grabby, and long lasting. Should the side of the plate happen to contact a delicate object, you'll be relieved to know that it is soft to the touch. This is great addition to your backing plate arsenal.
Mirka 102GG specifications: 2-7/8" diameter | 5/16-24 male thread
Sanding? Add a Mirka Interface Pad.
Interface pads increase contourability and help to better distribute applied pressure across the face of the disc. To achieve maximum cushioning and shapability of the sanding disc, this is the interface pad you'll need. The Mirka 1033 3" Velcro Interface Pad measures 3" in diameter, and is 1/2" tall. More info: 1033
Need 3" sanding discs?
We offer several types of 3" Mirka® Sanding Discs, available in any quantity: Silver | Abralon | Abranet | Autonet
Need 3" buffing pads discs?
We offer several types of 3" buffing pads. Check them out here.
To view our entire backing plate lineup, visit the Backing Plate Main Page.
|
Part Number: 103GG |
Actual Diameter: 3 - 3/8" |
Thread size: 5/16-24 |
Backing Material: MICRO HOOK |
|
|
This plate features a traditional flare-shaped edge, allowing for progressive flexibility over contours and curves. The low profile hook attachment material is ideal for use with sanding discs, but easily hangs onto buffing pads, too. This plate is well built, and will last a very long time.
|
|
|
Price: $23.46 |
|
|
|
|
Part Number: 913GV |
Actual Diameter: 2 - 7/8" |
Thread size: 1/4 - 20 |
Backing Material: HOOK |
|
|
This backing plate is identical to the 913G, but features 3 holes, making it compatible for vacuum-capable machines. It features a traditional flared shape and standard hook attachment material. The shaft size is 1/4"-20. Most standard D/A machines use a 5/16"-24 mounting stud, so verify compatibility with your machine before ordering!
|
|
|
Price: $19.00 |
|
|
|
Mirka 3" Diameter Velcro Backing Plate
|
|
Click to enlarge image(s)
|
Designed for Abranet® & Autonet™ discs, but works well with all hook & loop systems.
The Mirka 913GV 3" Velcro Backing Plate is a small and lightweight. The flared edge of the plate is soft and pliable, so it works well on curved or complex surfaces. It is a direct replacement plate for the following Mirka machines: MR-3 | MR-30 | MR-350
The face of this plate is relatively flexible. When used on curved surfaces, its edge conforms with ease. Its micro-hook Velcro is short, grabby, and long lasting. Should the side of the plate happen to contact a delicate object, you'll be relieved to know that it is soft to the touch. Six vacuum holes ensure efficient vacuuming of the sanding surface. A non-vacuum version of this plate is also available: 913G
Mirka 913GV specifications: 2-13/16" diameter | 1/4-20 male thread
Sanding? Add a Mirka Interface Pad.
Interface pads increase contourability and help to better distribute applied pressure across the face of the disc. To achieve maximum cushioning and shapability of the sanding disc, this is the interface pad you'll need. The Mirka 1033 3" Velcro Interface Pad measures 3" in diameter, and is 1/2" tall. More info: 1033 | 9133 | 9947
Need 3" sanding discs?
We offer several types of 3" Mirka® Sanding Discs, available in any quantity: Silver | Abralon | Abranet | Autonet
Need 3" buffing pads discs?
We offer several types of 3" buffing pads. Check them out here.
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 2-13/16"
- Attachment material: hook
- Max speed: 13,000 r.p.m.
- Weight: 28g (.99 oz.)
|
- Thread size: 1/4-20 male
- Height to mounting pad: 3/8"
- Designed for use with Abranet® and Autonet™ sanding discs, but works well with all hook & loop systems
|
|
Part Number: 913G |
Actual Diameter: 2 - 7/8" |
Thread size: 1/4 - 20 |
Backing Material: HOOK |
|
|
This backing plate is rather soft and pliable. It features a traditional flare-shaped edge, allowing for progressive flexibility over contours and curves. Features hook attachment material. The shaft size is 1/4"-20. Most standard D/A machines use a 5/16"-24 mounting stud, so verify compatibility with your machine before ordering! |
|
|
Price: $19.00 |
|
|
|
Mirka 3" Diameter Backing Plate
|
|
Click to enlarge image(s)
|
Designed for Abranet® & Autonet™ discs, but works well with all hook & loop systems.
The Mirka 913GV 3" Velcro Backing Plate is a small and lightweight. The flared edge of the plate is soft and pliable, so it works well on curved or complex surfaces. It is a direct replacement plate for the following Mirka machines: MR-3 | MR-30 | MR-350
The face of this plate is relatively flexible. When used on curved surfaces, its edge conforms with ease. Its micro-hook Velcro is short, grabby, and long lasting. Should the side of the plate happen to contact a delicate object, you'll be relieved to know that it is soft to the touch. A vacuum-ready version of this plate featuring six vacuum holes is also available: 913GV
Mirka 913G specifications: 2-13/16" diameter | 1/4-20 male thread
Sanding? Add a Mirka Interface Pad.
Interface pads increase contourability and help to better distribute applied pressure across the face of the disc. To achieve maximum cushioning and shapability of the sanding disc, this is the interface pad you'll need. The Mirka 1033 3" Velcro Interface Pad measures 3" in diameter, and is 1/2" tall. More info: 1033 | 9133 | 9947
Need 3" sanding discs?
We offer several types of 3" Mirka® Sanding Discs, available in any quantity: Silver | Abralon | Abranet | Autonet
Need 3" buffing pads discs?
We offer several types of 3" buffing pads. Check them out here.
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 2-13/16"
- Attachment material: hook
- Max speed: 13,000 r.p.m.
- Weight: 28g (.99 oz.)
|
- Thread size: 1/4-20 male
- Height to mounting pad: 3/8"
- Designed for use with Abranet® and Autonet™ sanding discs, but works well with all hook & loop systems
|
|
Part Number: 103 |
Actual Diameter: 3 - 3/8" |
Thread size: 5/16-24 |
Backing Material: VINYL |
|
|
This plate features a traditional flare-shaped edge, allowing for progressive flexibility over contours and curves. The vinyl backing material is very durable, so it can stand a lot of disc changing. As is the case with all Mirka backing plates, it is well built, balanced, and will last a long time. Hard to find size!
|
|
|
Price: $21.78 |
|
|
|
Mirka 3-1/2" Diameter Backing Plate - Vinyl Face
|
|
Click to enlarge image(s)
|
Vinyl Face.
Mirka's backing plates are manufactured using a top quality molded polymer construction.
This means that the black hub, yellow foam center, and white face are molded together- not glued.
Each plate is balanced to eliminate vibration, so you can work comfortably. Its vinyl backing material is very durable, so it can handle a lot of disc changing.
The medium density polyurethane foam is somewhat firm, but will give a small degree due to its flared edge.
To view our entire backing plate lineup, visit the Backing Plate Main Page.
- Actual diameter: 3-3/8"
- Attachment material: vinyl
- Max speed: 13,000 r.p.m.
|
- Thread size: 5/16"-24 male
- Height to mounting pad: 1/2"
- Weight: 78g (2.75 oz.)
|
|
|