Buff Daddy Shipping Contact About Cart KBM




















  1" Diameter - Female Thread    /     /     /     /

Part Number:
1125
 Actual Diameter:
32mm / 1-1/4"
 Thread size:
1/4-20F
 Backing Material:
•• VINYL ••
This handy little backing plate features 1/4-20 plastic threads. Thread diameter/pitch is easily modified via tapping to 6mmx1.0 (similar diameter & pitch to 1/4-20), or via drilling & tapping to 5/16-24 thread. To avoid damaging the threads, do not overtighten or repeatedly install/reinstall the backing plate.
Price:
$11.95
Qty:
Mirka 1-1/4" (32mm) Diameter Vinyl Backing Plate

Mirka 1-1/4" (32mm) Diameter Vinyl Backing Plate

Mirka 1-1/4" (32mm) Diameter Vinyl Backing Plate
Click to enlarge image(s)


True tight-area sanding & polishing just became a reality.

The Mirka 32mm Vinyl-Faced Backing Plate is a must have for tight-area sanding & polishing tasks. When mounted to compact rotary or random orbital machines, these plates eliminate much of the difficulty and stress commonly associated with critical tight-area work. 

Also available with a Velcro Face here.

These backing plates feature 1/4-20 female plastic threads.
Backing plates with re-sized threads can be found here.

In most cases, you will need an adaptor or extension to install this plate onto your machine. We offer adaptors and extensions here.

These backing plates feature an exact diameter of 29mm.
They were originally designed for use with 32mm diameter sanding rosettes.
PSA (peel and stick) Sanding Rosettes can be found here.

Notes:
1. To avoid damaging the threads, do not overtighten or repeatedly install/reinstall the backing plate.
2. To date, there have been no reports of thread failures on any of the plates that I've sold.

Part Number:
1125G
 Actual Diameter:
32mm / 1-1/4"
 Thread size:
1/4-20F
 Backing Material:
MICRO HOOK
This handy little backing plate features 1/4-20 plastic threads. Thread diameter/pitch is easily modified via tapping to 6mmx1.0 (similar diameter & pitch to 1/4-20), or via drilling & tapping to 5/16-24 thread. To avoid damaging the threads, do not overtighten or repeatedly install/reinstall the backing plate.
Price:
$11.95
Qty:
Mirka 1-1/4" (32mm) Diameter Velcro Backing Plate

Mirka 1-1/4" (32mm) Diameter Velcro Backing Plate

Mirka 1-1/4" (32mm) Diameter Velcro Backing Plate
Click to enlarge image(s)


True tight-area sanding & polishing just became a reality.

The Mirka 32mm Velcro-Faced Backing Plate is a must have for tight-area sanding & polishing tasks. When mounted to compact rotary or random orbital machines, these plates eliminate much of the difficulty and stress commonly associated with critical tight-area work. 

Also available with a Vinyl Face here.

These backing plates feature 1/4-20 female plastic threads.
Backing plates with re-sized threads can be found here.

In most cases, you will need an adaptor or extension to install this plate onto your machine. We offer adaptors and extensions here.

These backing plates feature an exact diameter of 29mm.
They were originally designed for use with 32mm diameter sanding rosettes.
PSA (peel and stick) Sanding Rosettes can be found here.

Notes:
1. To avoid damaging the threads, do not overtighten or repeatedly install/reinstall the backing plate.
2. To date, there have been no reports of thread failures on any of the plates that I've sold.
 
   Looking for a buffing pad to fit this backing plate?   
View the entire line of 32mm (1-1/4") Buffing Pads and Microfiber Discs here.

  1" Diameter - Male Thread    /     /     /     /

Part Number:
995.001
 Actual Diameter:
1-3/16"
 Thread size:
M8-1.25
 Backing Material:
HOOK
The Rupes® 995.001" 1.25" Nano Velcro Backing Plate is designed for use with the Rupes Nano Multi-Function Polisher. Composite Plastic plate and threads are lightweight and durable.
Price:
$16.25
Qty:
Rupes 1-1/4" Nano Velcro Backing Plate

Rupes 1-1/4" Nano Velcro Backing Plate

Rupes 1-1/4" Nano Velcro Backing Plate
995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>Actual diameter: 1-3/16"<br/>Velcro diameter: 1-1/8"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 10 grams<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>Actual diameter: 1-3/16"<br/>Velcro diameter: 1-1/8"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 10 grams<br/><br/>995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>Fits Short Neck (HR81M) and Long Neck (HR81ML) Rupes Nano Multi-Function Polishers.<br/><br/>Actual diameter: 1-3/16"<br/>Velcro diameter: 1-1/8"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 10 grams<br/><br/>995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>Shown mounted to the 562.390/C Rupes BigFoot Nano Rotary Action Module.<br/><br/>Actual diameter: 1-3/16"<br/>Velcro diameter: 1-1/8"<br/>Plate material: Plastic<br/>Thread size: M8-1.25 male<br/>Weight: 10 grams<br/><br/>9.1396/C<br/>Rupes BigFoot Nano Multi-Wrench.<br/><br/>Use to install and remove modules & backing plates.<br/><br/>291.390/C<br/>Rupes Rotary-Action Extension Shaft<br/><br/>Extend the reach of YOUR Nano! The Rupes® 291.390/C Nano Rotary-Action Extension Shaft is made specifically for use with the Rupes iBrid Nano Multi-Function Polisher. This extension adds 2-1/4" of length between the machine and its backing plate. It features M6-1.0 male thread on one end (which mounts into the machine), and M8-1.25 female thread on the other (Nano Backing Plates screw into this end).<br/><br/>995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>If you plan to use a Velcro-backed sanding disc or rosette, the 995.001 also installs onto the Rupes BigFoot Nano 3mm Random Orbital Module (581.390/C). Shown paired to the 1" Vinyl-Faced Backing Plate (997.001).<br/><br/>995.001<br/>Rupes® 1-1/4" Nano Velcro Backing Plate.<br/><br/>The 995.001 also installs onto the Rupes BigFoot Nano 12mm Random Orbital Module (580.390/C). Shown paired with the 996.001 Nano 2" Velcro Backing plate.<br/><br/>
Click to enlarge image(s)


Fits all Rupes® Nano Multi-Function Polishers.
1-1/4" Diameter Nano Velcro-Face Backing Plate.

Rupes® BigFoot Nano Multi-Function Polishers can be used for a multitude of tasks, but its trio of backing plates must be in tip-top shape. After extended use, the factory supplied backing plates can degrade. An accidental dropping of the machine can bend or break a plate. You'll be dead in the water unless you've got a replacement Nano Backing Plate on hand.

The Rupes 995.001 1-1/4" Nano Velcro-Face Backing Plate fits all HR81M & HR81ML BigFoot iBrid Nano Polishers.

    Looking for a 2" version of this plate?  
Check out the 996.001 Rupes 2" Nano Velcro-Face Backing Plate.

    Looking for a 1-1/4" vinyl version of this plate (for PSA sanding rosettes)?  
Check out the 997.001 Rupes 1-1/4" Nano Vinyl-Face Backing Plate.
Specifications

  • Backing plate diameter: 1-3/16"

    • Velcro diameter: 1-1/8"

    • Attachment material:
      Velcro®- low profile hook

  • Weight: 10 grams

    • Thread size: M8-1.25 male

Note: Carefully remove polishing pads to avoid loosening the Velcro material, particularly when used for extended periods of time!

Part Number:
9P06.060
 Actual Diameter:
30mm
 Thread size:
M10
 Backing Material:
•• VINYL ••
The Rupes® 9P06.061" 30mm Vinyl Backing Plate comes factory installed on the Rupes® LD30 Pneumatic Orbital DeNibber. If you own an LD30, it's a good idea to keep a spare on hand, as they are VERY difficult to locate in a pinch.
Price:
$27.46
Qty:
Rupes 30mm Vinyl-Face Backing Plate - fits LD30

Rupes 30mm Vinyl-Face Backing Plate - fits LD30

Rupes 30mm Vinyl-Face Backing Plate - fits LD30
Built for ultra-high speed! The Rupes 9P06.060 30mm Vinyl-Face Backing Plate features a durable vinyl face. It is designed for use with all brands of PSA (peel and stick adhesive) sanding rosettes, including Mirka's Polarstar Spot Repair Discs, as well as their Waterproof Sanding Rosettes.The Rupes 9P06.060 30mm Vinyl-Face Backing Plate is factory supplied with the Rupes LD30 Pneumatic 30mm De-Nibber.
Click to enlarge image(s)
Spins as quick as a 30mm loop-de-loop lightning bolt!

The Rupes LD30 30mm Air-Powered Orbital Denibber tops out at 7,500 RPM, which can stress its tiny backing plate. The 9P06.061 Vinyl-Faced 30mm Backing Plate is a direct repacement for the factory installed unit.  Use with PSA (peel & stick adhesive) sanding rosettes & discs.
 
Technique, overall use, and the type of work being accomplished can also impact the life of the plate. Should you accidentally drop the machine (and the plate is impacted in the fall), its metal stud can bend, causing the plate to wobble something fierce. Eventually, in one way or another... the backing plate will need to be replaced.

It's a good idea to keep at least one spare on hand if you own an LD30, as they are not easy to locate in a pinch.

To view our entire backing plate lineup, visit the Backing Plate Main Page.
Specifications
  • Actual diameter: 30mm

  • Attachment material: vinyl face for PSA rosettes
  • Thread size: M10-1.25 male

  • Height from face to mounting pad: 1/2"

  • Weight: 14g (.50 oz.)

Part Number:
9P06.061
 Actual Diameter:
30mm
 Thread size:
M10
 Backing Material:
HOOK
The Rupes® 9P06.061" 30mm Velcro Backing Plate comes factory installed on the Rupes® LD30 Pneumatic Orbital DeNibber. If you own an LD30, it's a good idea to keep a spare on hand, as they are VERY difficult to locate in a pinch.
Price:
$27.54
Qty:
Rupes 30mm Velcro Backing Plate - fits LD30

Rupes 30mm Velcro Backing Plate - fits LD30

Rupes 30mm Velcro Backing Plate - fits LD30
Built for ultra-high speed! Light weight, soft edge, and intermediate-length hook material securely attaches to loop-style sanding discs and buffing pads.The Rupes 9P06.061 30mm Velcro-Face Backing Plate is factory supplied with the Rupes LD30 Pneumatic 30mm De-Nibber.
Click to enlarge image(s)
Spins as quick as a 30mm loop-de-loop lightning bolt!

The Rupes LD30 30mm Air-Powered Orbital Denibber tops out at 7,500 RPM, which can stress its tiny backing plate. The 9P06.061 Hook-Face 30mm Backing Plate is a direct repacement for the factory installed unit.  Use with hook and loop (aka Velcro®) sanding rosettes & discs.
 
Technique, overall use, and the type of work being accomplished can also impact the life of the plate. Should you accidentally drop the machine (and the plate is impacted in the fall), its metal stud can bend, causing the plate to wobble something fierce. Eventually, in one way or another... the backing plate will need to be replaced.

It's a good idea to keep at least one spare on hand if you own an LD30, as they are not easy to locate in a pinch.

To view our entire backing plate lineup, visit the Backing Plate Main Page.
Specifications
  • Actual diameter: 30mm

  • Attachment material: intermediate-height hook
  • Thread size: M10-1.25 male

  • Height from face to mounting pad: 1/2"

  • Weight: 14g (.50 oz.)