Buff Daddy Shipping Contact About Cart KBM
Rupes Replacement 5" Rubber Shroud



















Rupes Replacement 5" Rubber Shroud

Rupes Replacement 5" Rubber Shroud

Rupes Replacement 5" Rubber Shroud
<br/>Rupes BigFoot Replacement Parts.<br/>651.246 | Rubber Shroud aka Rubber Boot.<br/>Fits: LHR15ES Legacy • LHR15ll MK2 • LHR15lll MK3<br/><br/>Rupes BigFoot Replacement Parts.<br/>65.245 | Eccentric Cover.  Fits:<br/>LHR15ES Legacy • LHR15ll Mark 2 • LHR15lll Mark 3<br/>LHR21ES Legacy • LHR21ll Mark 2 • LHR21lll Mark 3 • LHR12e Duetto<br/><br/>Rupes BigFoot Random Orbital Polishers are world renowned for their wonderfully balanced rotating assemblies. All other aspects of a machine being equal... the larger the stroke, the more CRITICAL the balancing of the rotating assembly BECOMES.<br/><br/>Rupes LHR15lll and LHR21lll MARK 3 Random Orbital Polishers are unmatched in terms of their comfort & controllability during use.<br/><br/>Specifications for 5" Polisher-<br/>Part number: LHR15lll (MARK 3)<br/>Backing plate diameter: 5"/125mm<br/>Machine Length: 16-13/16”<br/>Weight: 5lb. 11oz. (not inc. cord)<br/>Cord length: 28' 11"<br/>Cord weight: 1lb. 8oz.<br/>Power input: 120V/60Hz<br/>Power consumption/rating: 500 watts<br/>Fixed speed: 3k-5.2k OPM<br/>Orbit diameter: 15mm<br/><br/>Specifications for 6" Polisher-<br/>Part number: LHR21lll (MARK 3)<br/>Backing plate diameter: 6"/150mm<br/>Machine Length: 16-13/16”<br/>Weight: 5lb. 15oz. (not inc. cord)<br/>Cord length: 28' 11"<br/>Cord weight: 1lb. 8oz.<br/>Power input: 120V/60Hz<br/>Power consumption/rating: 500 watts<br/>Fixed speed: 3k-4.5k OPM<br/>Orbit diameter: 21mm<br/><br/><br/>Rupes BigFoot Replacement Parts.<br/>651.246 | Rubber Shroud aka Rubber Boot.<br/>Fits: LHR15ES Legacy • LHR15ll MK2 • LHR15lll MK3<br/><br/>
Click to enlarge image(s)


Replacement Parts: Rubber Shroud, for LHR15 and Duetto machines.

The Rupes® 651.246 Rubber Shroud is designed to make light contact with the backing plate. After extended use, the shrouds can wear down. If this a concern (or a shroud becomes damaged), it's easy enough to install a new one. Slip fit design... peel off the old one, and slip the new one into place. Oftentimes, a dab of glue is applied to the shroud (right where the hex wrench rests), which can be easily softened with a blast of heat from a blow dryer or a heat gun, or via appilication of a typical tire dressing.

This assembly fits the following machines:
LHR15ES | LHR15ll | LHR15lll | LHR12e

Also available for 6" machines here.

View all Rupes® products here.